Cryogenic ASU Air Pre Purification
Pre purifying air feed to cryogenic air separation units by removing water, carbon dioxide, and trace hydrocarbons on a graded molecular sieve and activated alumina bed.
Read →Complete project, engineering design, fabrication, installation, commissioning, and handover. FireBag-led EPC.
Pre purifying air feed to cryogenic air separation units by removing water, carbon dioxide, and trace hydrocarbons on a graded molecular sieve and activated alumina bed.
Read →Heatless desiccant drying of compressed instrument air and plant air using activated alumina to deliver pressure dew points below minus 40 °C for DCS pneumatic systems.
Read →Breaking the ethanol water azeotrope using 3A molecular sieve to produce fuel grade anhydrous ethanol at 99.5 percent purity or higher for blending into gasoline.
Read →Drying ethylene cracked gas using 3A molecular sieve to protect downstream low temperature distillation and polymerisation catalysts from water poisoning and coke laydown.
Read →Carbon dioxide removal from anaerobic digester biogas and landfill gas using carbon molecular sieve PSA to deliver grid quality bio methane for pipeline injection or CNG vehicle fuel.
Read →Sulphur impregnated activated carbon mercury removal from natural gas, condensate, and refinery streams to protect cryogenic and brazed aluminium equipment from mercury amalgam attack.
Read →Removing hydrogen sulphide and carbon dioxide from natural gas and refinery streams using 13X molecular sieve TSA or impregnated activated carbon to meet pipeline and LNG specifications.
Read →Compressed air drying and purification to ISO 8573 air quality standards using activated alumina or silica gel desiccant in heatless or heated dryer cycles.
Read →High purity hydrogen recovery from steam methane reformer off gas, chlor alkali by product gas, or electrolyser product using a layered adsorbent bed pressure swing adsorption cycle.
Read →Removing water, carbon dioxide, mercury, and trace contaminants from natural gas feed to LNG liquefaction trains using 13X molecular sieve and impregnated guard beds.
Read →Tell us briefly what you need. Our technical team responds within one business day.
Request the TDS / datasheet. We send it on email after a brief review.