Multi Media Filter
Multi media filter for suspended solids and turbidity removal upstream of activated carbon polishing, reverse osmosis, or process reuse in water treatment trains.
A Multi Media Filter uses graded layers of anthracite, sand, and garnet to remove suspended solids and turbidity from drinking water, industrial process water, and effluent reuse streams. Outlet turbidity below 1 NTU protects downstream activated carbon, reverse osmosis, and process equipment from particulate fouling.
Pre Treatment Before Adsorption Polishing
The SorbiTech Multi Media Filter is the pre treatment workhorse that sits upstream of every activated carbon polishing bed, reverse osmosis membrane, and process reuse train. The graded media bed (anthracite on top for the coarse retention, silica sand in the middle for the fine retention, garnet at the bottom for the underdrain support) captures suspended solids and turbidity that would otherwise blind the downstream adsorbent. Outlet turbidity below 1 NTU protects the carbon bed campaign life and the membrane element service interval.
Bed Design and Backwash Cycle
The standard bed is 600 mm anthracite at the top, 400 mm silica sand in the middle, 100 mm garnet at the bottom, supported on a wedge wire underdrain. Service flow runs at 10 to 20 m/h face velocity; backwash flow at 30 to 50 m/h lifts the bed by 20 to 30 percent to restratify and discharge the captured solids. Backwash interval is typically 24 to 72 hours depending on the inlet load. Air scour before water backwash improves the cleaning efficiency on biologically active raw waters.
Scope of Supply
The complete package includes:
- Pressure vessel (ASME VIII) or open gravity basin (concrete or steel)
- Graded media charge: anthracite, silica sand, garnet
- Wedge wire or strainer underdrain
- Inlet diffuser and outlet collector
- Backwash valves, flow meter, and controls
- Air scour blower and distribution lateral
- Differential pressure transmitter and turbidity meter
Where It Fits
Upstream of coalescing filtration for oily water polishing; upstream of GAC 1240 for taste, odour, and dissolved organic carbon removal; upstream of reverse osmosis to protect the membrane element. Applications span drinking water treatment across the municipal water and industrial water sectors.
Lifecycle
The graded media bed gives 5 to 8 years of service before partial replacement. Anthracite and garnet typically last the longest; silica sand needs makeup every 3 to 5 years to compensate for backwash loss. SorbiTech supplies the media replacement charge through SorbiTech with documented size grading.
Engineered Scope
Project References
Applications This System Serves
-
01
Process Duty
Arsenic Removal from Water
Activated alumina and specialty iron oxide media for arsenic removal from drinking water supplies in geological belts where natural arsenic exceeds the WHO guideline…
-
02
Process Duty
Taste and Odor Removal from Drinking Water
Granular activated carbon removal of taste and odour compounds (geosmin, 2 methylisoborneol, algal toxins) from drinking water supplies affected by seasonal algal blooms and…
-
03
Process Duty
Dechlorination of Process Water
Granular activated carbon dechlorination of municipal supply water ahead of reverse osmosis, ion exchange, or chemical processing to protect downstream equipment from oxidative damage.
-
04
Process Duty
PFAS Removal from Water
Granular activated carbon and specialty media for per and polyfluoroalkyl substance (PFAS) removal from drinking water, industrial process water, and remediation projects to meet…
-
05
Process Duty
Groundwater Remediation
Granular activated carbon groundwater remediation for legacy industrial sites contaminated with petroleum hydrocarbons, chlorinated solvents, or BTEX, with relocatable skid systems for plume migration.
-
06
Process Duty
Industrial Process Water Purification
Process water polishing for industrial manufacturing using activated carbon and activated alumina to remove dissolved contaminants ahead of reverse osmosis, demineralisation, or direct process…
Media Used in This System
-
01
Adsorbent
Activated Carbon GAC 1240
Coal based granular activated carbon for dechlorination, taste and odour, and dissolved organics in water.
Form
12 × 40 US mesh (0.42–1.70 mm)
-
02
Adsorbent
Powdered Activated Carbon
Fine powder carbon for slurry dosing in water treatment, sugar decolorization, pharmaceutical purification, and emergency contamination response.
Form
200×325 mesh (45–75 µm)
-
03
Adsorbent
Activated Alumina AA-201
Smooth sphere activated alumina for compressed air and gas drying, fluoride removal, and guard bed duty.
Water Cap.
≥ 18 %
Industries Served
-
01
Sector
Industrial Water Treatment
Process water polishing, cooling tower blowdown, boiler feedwater, and groundwater remediation served by SorbiTech adsorbent media and engineered treatment skids.
-
02
Sector
Municipal Water Treatment
Activated carbon and activated alumina for taste and odour, dechlorination, and fluoride removal in drinking water treatment. NSF eligible media and complete treatment units.
Discuss Your Engineering Requirements
Our engineers review your duty conditions and recommend the right configuration.